{"title":"Laser Cut Kits","description":"","products":[{"product_id":"lx017-tt-laser-cut-2m-palisade-security-fencing-gates-tt3mm1100","title":"LX017-TT Laser Cut 2m Palisade Security Fencing \u0026 Gates TT\/3mm\/1:100","description":"A pack of laser cut card TT \/ 3mm scale 2m Palisade Security Fencing with point\/arrow topped pales. A very versatile self-assembly kit with a wide range of uses on your model railway layout or 1:100 diecast diorama. Ideal for use around maintenance depots, industrial units, factories, waste land and general trackside use. Builds up to 90cm of fencing. This fence stands a scale 2 metres tall (20mm in TT gauge) and is flexible enough to be used around curved track \u0026amp; roads, yet sturdy enough when assembled to stand the test of time on your layout. Supplied pre-cut with 25 individual fence panels, 30 posts plus a pair of gates and gate posts. Straightforward to assemble but does contain some fine parts so a steady hand is needed. Can be painted using artists acrylics or left in its natural colour. Some experience assembling detailed card or plastic kits is essential when building this kit. Each panel \u0026amp; fence post is assembled from individual laser cut components for added realism and detail. Can be used up gentle to moderate inclines and embankments.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eLaser Cut from durable, eco-friendly laserboard\u003c\/li\u003e\n\u003cli\u003eVery easy to assemble - just a minute per gate, post and fence panel.\u003c\/li\u003e\n\u003cli\u003eCan be glued directly to your baseboard and will even work up and down gentle inclines \u0026amp; embankments.\u003c\/li\u003e\n\u003cli\u003eSimple, sturdy, layered construction for a durable model once assembled.\u003c\/li\u003e\n\u003cli\u003ePerfect for any TT \/ 1:100 \/ 3mm model railway layout or diorama.\u003c\/li\u003e\n\u003cli\u003eCompatible with all makes of OO gauge model railway.\u003c\/li\u003e\n\u003cli\u003eSupplied with easy to follow instructions, in a cellophane packet..\u003c\/li\u003e\n\u003cli\u003eFence Dimensions (approx): L: 65cm x H: 20mm (approximate) x D: 3mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eTools Required (Essential!):\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003ePVA Glue or Deluxe Materials Roket Card Glue (Recommended) - A fine tipped applicator is essential.\u003c\/li\u003e\n\u003cli\u003eA very sharp craft knife\u003c\/li\u003e\n\u003cli\u003eTweezers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53324533596424,"sku":"LX017-TT","price":11.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx017-tt-laser-cut-2m-palisade-security-fencing-gates-tt-3mm-1-100-395-p.jpg?v=1771200829"},{"product_id":"lx025-tt-laser-cut-swing-arm-security-gates-tt3mm1100","title":"LX025-TT Laser Cut Swing Arm Security Gates-TT\/3mm\/1:100","description":"A pack of 6, self-assembly laser cut card Swing Arm Security Gates in TT \/ 3mm scale. Ideal for adding detail to car parks, freight depots, maintenance depots and more. Straightforward to assemble with instructions included. Can be easily painted using artists acrylics. Pack comprises of 2 x 2m gates, 2 x 4m gates and 2 x 6m gates plus posts for each gate. Gates can be used individually or in pairs to cover wider spans.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eLaser Cut 700 micron card - You only need a knife to gently release the parts from the sheet, all cutting is done for you!\u003c\/li\u003e\n\u003cli\u003eStraightforward to assemble - just a couple of minutes per pallet\u003c\/li\u003e\n\u003cli\u003eScale accuracy - We use a 0.1mm ceramic laser for very tight tolerances \u0026amp; accurate scaling from real life 1:1 prototypes.\u003c\/li\u003e\n\u003cli\u003eSimple, sturdy, layered construction for durable models once assembled.\u003c\/li\u003e\n\u003cli\u003ePerfect for any TT \/ 1:100 \/ 3mm model railway layout or diorama.\u003c\/li\u003e\n\u003cli\u003eCompatible with all makes of TT gauge model railway.\u003c\/li\u003e\n\u003cli\u003eSupplied with easy to follow instructions, in a cellophane packet..\u003c\/li\u003e\n\u003cli\u003eDimensions:\u003cul\u003e\n\u003cli\u003eSmall gates (2m): W: 20mm x D: 1.4mm x H: 8.4mm\u003c\/li\u003e\n\u003cli\u003eMedium gates (4m): W: 40mm x D: 1.4mm x H: 8.4mm\u003c\/li\u003e\n\u003cli\u003eLarge gates (6m): W: 60mm x D: 1.4mm x H: 8.4mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53324549718280,"sku":"LX025-TT","price":6.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx025-tt-laser-cut-swing-arm-security-gates-tt-3mm-1-100-445-p.jpg?v=1771201040"},{"product_id":"lx030-tt-laser-cut-platform-fencing-tt3mm1100","title":"LX030-TT Laser Cut Platform Fencing TT\/3mm\/1:100","description":"A pack of laser cut card Picket style platform fencing as used by a number of railway companies over the years including LNER, GWR, LMS \u0026amp; SR, and can also be used in a number of other areas on your TT scale model railway layout. Available in 12mm height representing scale height of 4ft.\u003cbr\u003eThe fence is easy to assemble, requiring just a craft knife and \u003ca href=\"http:\/\/www.scalemodelscenery.co.uk\/shop\/deluxe-materials-ad-57-roket-card-glue\/\" target=\"_blank\"\u003esuitable glue with a fine tipped applicator\u003c\/a\u003e, and is flexible enough to be used on curved platforms and is easily cut to length too. Supplied pre-cut with 8 strips of fencing, 4 ramp sections (2 left hand, 2 right hand) plus 2 single gates and one double gate. Can be painted using artists acrylics or left in its natural colour for a weathered appearance.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eLaser Cut 0.7mm - You only need a knife to gently release the parts from the sheet... all cutting is done for you!\u003c\/li\u003e\n\u003cli\u003eVery easy to assemble - just a few minutes per gate \u0026amp; length of fencing.\u003c\/li\u003e\n\u003cli\u003eCan be glued directly to your platform (requires posts to be trimmed), mounted into holes or glued along the rear edge of the platform\u003c\/li\u003e\n\u003cli\u003eScale accuracy - We use a 0.1mm ceramic laser for very tight tolerances \u0026amp; accuracy.\u003c\/li\u003e\n\u003cli\u003eSimple, sturdy, layered construction for a durable model once assembled.\u003c\/li\u003e\n\u003cli\u003ePerfect for any TT \/ 1:100 \/ 3mm model railway layout or diorama\u003c\/li\u003e\n\u003cli\u003eCompatible with all makes of TT gauge model railway\u003c\/li\u003e\n\u003cli\u003eSupplied with easy to follow instructions, in a cellophane packet.\u003c\/li\u003e\n\u003cli\u003eDimensions (approx): L: 90cm (excluding ramps \u0026amp; gates) x H: 12mm  x D: 2mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53324581437704,"sku":"LX030-TT","price":11.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx030-tt-laser-cut-platform-fencing-tt-3mm-1-100-484-p.jpg?v=1771201290"},{"product_id":"lx037-8mm-laser-cut-lettering-8mm","title":"LX037-8mm Laser Cut Lettering 8mm","description":"A pack of laser cut card lettering in a choice of popular period \u0026amp; railway fonts. Ideal for scratch-building wall mounted \u0026amp; roof top signs on your steam era model railway layout. The letters stand 8mm tall with very fine detail and can be used on almost any gauge layout. It takes just a few minutes to assemble a detailed \u0026amp; realistic rooftop or wall mounted sign with this kit, enabling the railway modeller or diecast diorama builder to add the essential finishing touch to period factories \u0026amp; warehouses etc. The letters can also be used very effectively to make shop or public house signs too. Each pack comes complete with 3 mounting frame strips and 12 x \"A Frame\" supports for supporting rooftop signs. Can be easily painted using artist acrylics.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFont Choices:\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/laser-cut-lettering-300x161_jpg.jpg\" style=\"width: 300px; height: 161px;\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e58 x Letters, 12 x A frames \u0026amp; 3 mounting strips\u003c\/li\u003e\n\u003cli\u003eLaser Cut 700 micron card - You only need a knife to gently release the parts from the sheet, all cutting is done for you!\u003c\/li\u003e\n\u003cli\u003eTakes just a few minutes to assemble.\u003c\/li\u003e\n\u003cli\u003eScale accuracy - We use a 0.1mm ceramic laser for very tight tolerances \u0026amp; accuracy.\u003c\/li\u003e\n\u003cli\u003eSturdy, layered construction for a durable model once assembled.\u003c\/li\u003e\n\u003cli\u003eInstructions \u0026amp; construction tips included\u003c\/li\u003e\n\u003cli\u003eLetter Height: 8mm\u003c\/li\u003e\n\u003cli\u003eFrame Height (assembled): 16mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eScale Compatibility\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eSuitable for all gauges including N, TT, OO \u0026amp; O.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Gill Sans","offer_id":53324590579976,"sku":"LX037-8mm-B","price":11.49,"currency_code":"GBP","in_stock":true},{"title":"GWR","offer_id":53324590612744,"sku":"LX037-8mm-C","price":10.49,"currency_code":"GBP","in_stock":true},{"title":"Swindon","offer_id":53324590645512,"sku":"LX037-8mm-A","price":10.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx037-8mm-laser-cut-lettering-8mm-font-gwr-7133-p.jpg?v=1771201447"},{"product_id":"lx037-12mm-laser-cut-lettering-12mm","title":"LX037-12mm Laser Cut Lettering 12mm","description":"A pack of laser cut card lettering in a choice of popular period \u0026amp; railway fonts. Ideal for scratch-building wall mounted \u0026amp; roof top signs on your steam era model railway layout. The letters stand 8mm tall with very fine detail and can be used on almost any gauge layout. It takes just a few minutes to assemble a detailed \u0026amp; realistic rooftop or wall mounted sign with this kit, enabling the railway modeller or diecast diorama builder to add the essential finishing touch to period factories \u0026amp; warehouses etc. The letters can also be used very effectively to make shop or public house signs too. Each pack comes complete with 3 mounting frame strips and 12 x \"A Frame\" supports for supporting rooftop signs. Can be easily painted using artist acrylics.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFont Choices:\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/laser-cut-lettering-300x161_jpg.jpg\" style=\"width: 300px; height: 161px;\"\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e58 x Letters, 12 x A frames \u0026amp; 3 mounting strips\u003c\/li\u003e\n\u003cli\u003eLaser Cut 700 micron card - You only need a knife to gently release the parts from the sheet, all cutting is done for you!\u003c\/li\u003e\n\u003cli\u003eTakes just a few minutes to assemble.\u003c\/li\u003e\n\u003cli\u003eScale accuracy - We use a 0.1mm ceramic laser for very tight tolerances \u0026amp; accuracy.\u003c\/li\u003e\n\u003cli\u003eSturdy, layered construction for a durable model once assembled.\u003c\/li\u003e\n\u003cli\u003eInstructions \u0026amp; construction tips included\u003c\/li\u003e\n\u003cli\u003eLetter Height: 12mm\u003c\/li\u003e\n\u003cli\u003eFrame Height (assembled): 24mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eScale Compatibility\u003c\/strong\u003e\u003cul\u003e\u003cli\u003eSuitable for all gauges including N, TT, OO \u0026amp; O.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Swindon","offer_id":53324591235336,"sku":"LX037-12mm-A","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"Gill Sans","offer_id":53324591268104,"sku":"LX037-12mm-B","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"GWR","offer_id":53324591300872,"sku":"LX037-12mm-C","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx037-12mm-laser-cut-lettering-12mm-font-gwr-7123-p.jpg?v=1771201451"},{"product_id":"cx003-ultra-fine-brass-chain-35-links-per-inch-for-ooon","title":"CX003 Ultra Fine Brass Chain (35 links per inch) For OO\/O\/N","description":"An incredibly fine Brass chain with 35 links per inch. Perfect for use with a variety of scales including OO, O \u0026amp; N. Soldered, round links for extra strength. Sold in half-metre lengths.e.g. For 2m of chain add 4 items to your cart! Max length 50m. Suitable for representing medium duty chain on cranes \u0026amp; for securing wagon loads etc. Ideal for adding realism to line side scenes, wagons, engine sheds etc. 100's of uses on your layouts and diecast dioramas. Supplied in raw brass finish fresh from the factory so it will have quite a bright brass finish. Will tarnish naturally over time.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eScale compatibility:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eOO \/ 4mm \/ 1:76\u003c\/li\u003e\n\u003cli\u003eO \/ 1:43\u003c\/li\u003e\n\u003cli\u003e1:32\u003c\/li\u003e\n\u003cli\u003e1:72\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.scalemodelscenery.co.uk\/oo-gauge-industrial-buildings-51-w.asp\/\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/industrial-buildings-collection-1-_jpg.jpg\" style=\"width: 450px; height: 229px;\"\u003e\u003c\/a\u003e       \u003ca href=\"https:\/\/www.scalemodelscenery.co.uk\/oo-gauge-harbours-63-w.asp\/\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/the-harbour-collection_jpg.jpg\" style=\"width: 450px; height: 229px;\"\u003e\u003c\/a\u003e       \u003c\/p\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53324642681096,"sku":"CX003","price":5.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/cx003-ultra-fine-brass-chain-35-links-per-inch-for-oo-o-n-745-p.jpg?v=1771202139"},{"product_id":"lx064-tt-laser-cut-trackside-drainage-manholes-etc-tt3mm1100","title":"LX064-TT Laser Cut Trackside Drainage (Manholes etc) TT\/3mm\/1:100","description":"A set of laser cut \u0026amp; engraved TT scale trackside drainage components for detailing any modern image layout. This pack contains 10 x rectangular and 2 x large, round concrete inspection chamber cover slabs, along with 12 laser engraved manhole covers. Designed to be embedded into the ballast along the side of your track, with typical positioning being between the Up \u0026amp; Down lines at stations etc .Simply remove from the card sheets, paint the manhole covers if you wish, then glue them into place.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eLaser Cut 0.4mm laserboard \u0026amp; 3mm greyboard card - You only need a knife to gently release the parts from the sheet, all cutting is done for you!\u003c\/li\u003e\n\u003cli\u003eScale accuracy - We use a 0.1mm ceramic laser for very tight tolerances \u0026amp; accurate scaling from real life 1:1 prototypes.\u003c\/li\u003e\n\u003cli\u003ePerfect for any TT \/ 1:100 \/ 3mm model railway layout or diorama.\u003c\/li\u003e\n\u003cli\u003eCompatible with all makes of TT gauge model railway.\u003c\/li\u003e\n\u003cli\u003eCircular Inspection Chamber Covers: 16.7mm diameter x 3mm high.\u003c\/li\u003e\n\u003cli\u003eRectangular Inspection Chamber Covers: 9.9mm x 7.9mm x 3mm\u003c\/li\u003e\n\u003cli\u003eManhole Covers: 7.6mm x 6.08mm x 0.4mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eTools Required (Essential!):\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.scalemodelscenery.co.uk\/shop\/deluxe-materials-ad-57-roket-card-glue\/\"\u003eDeluxe Materials Roket Card Glue\u003c\/a\u003e (Recommended) - A fine tipped applicator is essential.\u003c\/li\u003e\n\u003cli\u003eA very sharp craft knife\u003c\/li\u003e\n\u003cli\u003eTweezers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA detailed step by step build Video guide can be found here: \u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=rcilrHl5Qos\"\u003ehttps:\/\/www.youtube.com\/watch?v=rcilrHl5Qos\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eA detailed step by step build guide can be found in the free section of our model club here: \u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/community.railwaymodellers.com\/folders\/257\"\u003eLX064 Manholes \u0026amp; LX009 Fire Hydrants\u003c\/a\u003e\u003c\/p\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53324730073352,"sku":"LX064-TT","price":6.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx064-tt-laser-cut-trackside-drainage-manholes-etc-tt-3mm-1-100-866-p.jpg?v=1771202702"},{"product_id":"lx133-tt-canopy-valance-2-tt3mm1100","title":"LX133-TT Canopy Valance #2 TT\/3mm\/1:100","description":"A pack of laser cut Canopy Valance for detailing TT \/ 1:100 scale model railway buildings. Based on a Great Western Railway design, but also used at a number of locations in other regions. Ideal for scratchbuilding and upgrading kits by other manufacturers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003ePack contains 3 x 194mm lengths of laser cut valance, cut from 0.4mm laserboard for a prototypical, realistic appearance.\u003c\/li\u003e\n\u003cli\u003eTotal length 582mm per pack.\u003c\/li\u003e\n\u003cli\u003eCan be easily painted and weathered using acrylic paints \u0026amp; weathering powders.\u003c\/li\u003e\n\u003cli\u003eAlso includes 3 x 2mm wide strips for optional additional detailing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53324934611208,"sku":"LX133-TT","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx133-tt-canopy-valance-2-tt-3mm-1-100-1757-p.jpg?v=1771205152"},{"product_id":"lx161-castellated-i-beam-10mm-pack-of-6","title":"LX161 Castellated I Beam 10mm (Pack of 6)","description":"A kit of laser cut parts to build 6 Castellated I Beams, each 10mm in height and 280mm in length. Precision cut from 0.4mm laserboard and can be painted with acrylic paints etc. Ideal for realistic structural work on scratch-building projects, construction site detailing and for use as lorry and wagon loads in a wide range of scales. Can be easily cut to length prior to assembly.\u003cbr\u003e\u003cbr\u003eDimensions (Each assembled beam):\u003cul\u003e\u003cli\u003eL: 280mm x H: 10mm x D: 4mm\u003c\/li\u003e\u003c\/ul\u003eScale Compatibility:\u003cul\u003e\u003cli\u003eOO, HO, O, N, TT, 1:43, 1:76, 1:48, 1:50, 1:100, 1:72\u003c\/li\u003e\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53324941721864,"sku":"LX161","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx161-castellated-i-beam-10mm-pack-of-6-1789-p.jpg?v=1771205219"},{"product_id":"lx173-tt-four-panel-exterior-doors-with-frames-stone-headers-tt3mm1100","title":"LX173-TT Four Panel Exterior Doors With Frames \u0026 Stone Headers TT\/3mm\/1:100","description":"A pack of 8 laser cut \u0026amp; engraved 10.6mm x 22mm four-panel exterior style doors complete with frames, header bricks and decorative arched top window. Ideal for scratch building or upgrading existing plastic \u0026amp; card buildings. Easy to assemble with simple, layered construction \u0026amp; even include a doorknob!\u003cul\u003e\n\u003cli\u003eScale Compatibility: OO \/ 4mm \/ 1:76\u003c\/li\u003e\n\u003cli\u003ePack of 8 doors: W: 10.6mm x H: 22mm\u003c\/li\u003e\n\u003cli\u003eRecommended glue: \u003ca href=\"https:\/\/www.scalemodelscenery.co.uk\/deluxe-materials-ad-57-roket-card-glue-481-p.asp\"\u003eDeluxe Materials Rocket Card Glue\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53324999164168,"sku":"LX173-TT","price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx173-tt-four-panel-exterior-doors-with-frames-stone-headers-tt-3mm-1-100-1896-p.jpg?v=1771205739"},{"product_id":"lx011-tt-laser-cut-6ft-wrought-iron-railings-tt3mm1100","title":"LX011-TT Laser Cut 6ft Wrought Iron Railings TT\/3mm\/1:100","description":"A pack of laser cut wrought iron railings (LX011-TTOO). Cut from 0.8mm laserboard to produce a flexible yet very durable fencing kit. These railings have a wide range of uses on your TT scale model railway layout or 1:100 diecast diorama. This fence stands a scale 6ft high in TT gauge (18mm) and is flexible enabling it to follow bends in roads \u0026amp; track, yet sturdy enough when assembled to stand the test of time on your layout. Supplied as a pack of 4 pre-cut giving a total of 51cm of fencing. Supplied unpainted.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eLaser Cut from 0.8mm brown laserboard (a very durable wood based board) - You only need a knife to gently release the parts from the sheet, all cutting is done for you!\u003c\/li\u003e\n\u003cli\u003eSimply mark \u0026amp; drill pilot holes in your baseboard, then glue the railings into place\u003c\/li\u003e\n\u003cli\u003eFlexible\u003c\/li\u003e\n\u003cli\u003eScale accuracy - We use a 0.1mm ceramic laser for very tight tolerances \u0026amp; accurate scaling from real life 1:1 prototypes.\u003c\/li\u003e\n\u003cli\u003ePerfect for any TT \/ 1:100 \/ 3mm model railway layout or diorama.\u003c\/li\u003e\n\u003cli\u003eCompatible with all makes of TT gauge model railway.\u003c\/li\u003e\n\u003cli\u003eCan be easily cut to length with scissors or a knife.\u003c\/li\u003e\n\u003cli\u003eFence Dimensions: L: 510mm x H: 18mm (installed fence height) x D: 0.8mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53324999262472,"sku":"LX011-TT","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx011-tt-laser-cut-6ft-wrought-iron-railings-tt-3mm-1-100-1897-dv-p.jpg?v=1771205739"},{"product_id":"lx006-tt-laser-cut-4ft-post-rail-lineside-fencing-tt3mm1100","title":"LX006-TT Laser Cut 4ft Post \u0026 Rail Lineside Fencing TT\/3mm\/1:100","description":"A pack of laser cut card post \u0026amp; rail fencing with 4 stiles and 4 footpath signs. A very versatile kit with a wide range of uses on your TT scale model railway layout or 1:100 diecast diorama. This fence stands a scale 4ft high (12mm in OO gauge) and is flexible enough to be used around curved track \u0026amp; roads, yet sturdy enough when assembled to stand the test of time on your layout. Supplied pre-cut with 6 strips of fencing, plus four styles \u0026amp; four signs. Easy to assemble. Can be painted using artists acrylics or left in its natural colour.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eLaser Cut 700 micron card - You only need a knife to gently release the parts from the sheet, all cutting is done for you!\u003c\/li\u003e\n\u003cli\u003eVery easy to assemble - just a few minutes per gate \u0026amp; length of fencing.\u003c\/li\u003e\n\u003cli\u003eCan be glued directly to your baseboard and will even work up and down gentle inclines \u0026amp; embankments.\u003c\/li\u003e\n\u003cli\u003eScale accuracy - We use a 0.1mm ceramic laser for very tight tolerances \u0026amp; accurate scaling from real life 1:1 prototypes.\u003c\/li\u003e\n\u003cli\u003eSimple, sturdy, layered construction for a durable model once assembled.\u003c\/li\u003e\n\u003cli\u003ePerfect for any TT \/ 1:100 \/ 3mm model railway layout or diorama.\u003c\/li\u003e\n\u003cli\u003eCompatible with all makes of TT gauge model railway.\u003c\/li\u003e\n\u003cli\u003eSupplied with easy to follow instructions, in a cellophane packet..\u003c\/li\u003e\n\u003cli\u003eFence Dimensions: L: 82cm x H: 12mm (installed fence height) x D: 3mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53325060833544,"sku":"LX006-TT","price":8.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx006-tt-laser-cut-4ft-post-rail-lineside-fencing-tt-3mm-1-100-7525-p.png?v=1771206407"},{"product_id":"lx077-tt-laser-cut-old-wooden-fencing-tt3mm1100","title":"LX077-TT Laser Cut Old Wooden Fencing TT\/3mm\/1:100","description":"A pack of laser cut, old wooden fencing, cut from real wood for a completely authentic finish! Ideal for detailing a run-down \u0026amp; neglected area of a busy railway yard, back alley or scrap yard. Fence stands a scale 6ft tall approx (18mm). Pack contains 5 x 110mm sections giving a total of 550mm of fencing plus posts \u0026amp; rails for rear fence detail. Each section is unique with broken panels \u0026amp; damage. Fence can be easily painted \u0026amp; weathered using artists acrylic paints \u0026amp; weathering powders. Very easy to assemble. Simply glue the post \u0026amp; rail sections into place on the rear of the fence, then drill a row of 1.5mm holes in your baseboard to accept the posts.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eLaser Cut 0.8mm laserboard - You only need a knife to gently release the parts from the sheet, all cutting is done for you!\u003c\/li\u003e\n\u003cli\u003eVery easy to assemble - just a few seconds for length of fencing.\u003c\/li\u003e\n\u003cli\u003eVery sturdy once assembled.\u003c\/li\u003e\n\u003cli\u003ePerfect for any TT \/ 1:100 \/ 3mm model railway layout or diorama.\u003c\/li\u003e\n\u003cli\u003eCompatible with all makes of TT gauge model railway.\u003c\/li\u003e\n\u003cli\u003eSupplied with easy to follow instructions, in a cellophane packet..\u003c\/li\u003e\n\u003cli\u003eFence Dimensions: L: 550mm x H: 18mm (installed fence height) x D: 1.6mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53325061816584,"sku":"LX077-TT","price":9.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx077-tt-laser-cut-old-wooden-fencing-tt-3mm-1-100-7530-p.jpg?v=1771206417"},{"product_id":"cx005-ultra-fine-black-chain-40-links-per-inch-for-ooon","title":"CX005 Ultra Fine Black Chain (40 links per inch) For OO\/O\/N","description":"An incredibly fine black chain with 40 links per inch. Perfect for use with a variety of scales including OO, O \u0026amp; N. Soldered, round links for extra strength. Sold in half-metre lengths.e.g. For 2m of chain add 4 items to your cart! Max length 50m. Suitable for representing medium duty chain on cranes \u0026amp; for securing wagon loads etc. Ideal for adding realism to line side scenes, wagons, engine sheds etc. 100's of uses on your layouts and diecast dioramas. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eScale compatibility:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eOO \/ 4mm \/ 1:76\u003c\/li\u003e\n\u003cli\u003eO \/ 1:43\u003c\/li\u003e\n\u003cli\u003e1:32\u003c\/li\u003e\n\u003cli\u003e1:72\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.scalemodelscenery.co.uk\/oo-gauge-industrial-buildings-51-w.asp\/\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/industrial-buildings-collection-1-_jpg.jpg\" style=\"width: 450px; height: 229px;\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.scalemodelscenery.co.uk\/oo-gauge-harbours-63-w.asp\/\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/the-harbour-collection_jpg.jpg\" style=\"width: 450px; height: 229px;\"\u003e\u003c\/a\u003e       \u003c\/p\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53325289586952,"sku":"CX005","price":5.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/cx005-ultra-fine-black-chain-40-links-per-inch-for-oo-o-n-10351-p.png?v=1771208775"},{"product_id":"cx006-ultra-fine-gun-metal-grey-chain-40-links-per-inch-for-ooon","title":"CX006 Ultra Fine Gun Metal Grey Chain (40 links per inch) For OO\/O\/N","description":"An incredibly fine gun metal grey chain with 40 links per inch. Perfect for use with a variety of scales including OO, O \u0026amp; N. Soldered, round links for extra strength. Sold in half-metre lengths.e.g. For 2m of chain add 4 items to your cart! Max length 50m. Suitable for representing medium duty chain on cranes \u0026amp; for securing wagon loads etc. Ideal for adding realism to line side scenes, wagons, engine sheds etc. 100's of uses on your layouts and diecast dioramas. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eScale compatibility:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eOO \/ 4mm \/ 1:76\u003c\/li\u003e\n\u003cli\u003eO \/ 1:43\u003c\/li\u003e\n\u003cli\u003e1:32\u003c\/li\u003e\n\u003cli\u003e1:72\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.scalemodelscenery.co.uk\/oo-gauge-industrial-buildings-51-w.asp\/\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/industrial-buildings-collection-1-_jpg.jpg\" style=\"width: 450px; height: 229px;\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.scalemodelscenery.co.uk\/oo-gauge-harbours-63-w.asp\/\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/the-harbour-collection_jpg.jpg\" style=\"width: 450px; height: 229px;\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53325289685256,"sku":"CX006","price":5.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/cx006-ultra-fine-gun-metal-grey-chain-40-links-per-inch-for-oo-o-n-10373-1-p.jpg?v=1771208769"},{"product_id":"lx394-tt-laser-cut-gravestones-pack-of-58-tt3mm1100","title":"LX394-TT Laser Cut Gravestones (Pack of 58) - TT\/3mm\/1:100","description":"\u003cp\u003eA pack of 58 laser cut \u0026amp; engraved TT gauge \/ 1:100 scale gravestones for detailing model graveyards \u0026amp; churchyards.\u003cbr\u003e\u003cbr\u003eEasy to work with gravestones, Laser cut from 1mm greyboard with engraved detailing such as roses, scrolls, crosses and text. Can be used straight from the pack or painted and weathered with acrylic paints \u0026amp; weathering powders.\u003c\/p\u003e\u003cp\u003eMatching gravestones \u0026amp; crosses can be glued together to form thicker stones if required.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e58 detailed gravestones in a pack\u003c\/li\u003e\n\u003cli\u003eLaser cut \u0026amp; engraved 1mm greyboard card\u003c\/li\u003e\n\u003cli\u003eGravestones range in size from 3 to 6mm wide and 4 to 10mm tall\u003c\/li\u003e\n\u003cli\u003eCompatible with all brands of TT \/ 1:100 scale model railway and diecast models\u003c\/li\u003e\n\u003cli\u003eCan be painted and further detailed with acrylic paints\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53325573587208,"sku":"LX394-TT","price":7.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx394-tt-laser-cut-gravestones-pack-of-58-tt-3mm-1-100-11957-p.jpg?v=1771211312"},{"product_id":"lx001-tt-laser-cut-five-bar-gates-posts-pack-of-3-tt-3mm-1100","title":"LX001-TT Laser Cut Five Bar Gates \u0026 Posts (Pack Of 3) - TT \/ 3mm \/ 1:100","description":"\u003cp\u003eA pack of three laser cut card farm style five bar gates with a wide range of uses on your TT \/ 3mm \/ 1:100 scale model railway layout. These gates take just a couple of minutes to assemble.\u003ca href=\"https:\/\/www.youtube.com\/watch?v=EYnAdSF7Hc8\u0026amp;t=2s\"\u003e Watch the demonstration video here.\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eCan be painted using artists acrylics or left in their natural colour.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLaser Cut from natural brown laserboard for a natural wood finish straight from the pack\u003c\/li\u003e\n\u003cli\u003eVery easy to assemble - just a couple of minutes per gate, saving you time over scratch-building!\u003c\/li\u003e\n\u003cli\u003eSimple, sturdy, layered construction for a durable model once assembled.\u003c\/li\u003e\n\u003cli\u003ePerfect for any TT \/ 3mm scale model railway layout or diorama\u003c\/li\u003e\n\u003cli\u003eCompatible with all brands of TT \/ 3mm \/ 1:100 scale model railway accessory\u003c\/li\u003e\n\u003cli\u003eSupplied with easy to follow instructions, in a cellophane packet.\u003c\/li\u003e\n\u003cli\u003eDimensions: W: 34 x H: 14 x D: 1.2mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53325813448968,"sku":"LX001-TT","price":4.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx001-tt-laser-cut-five-bar-gates-posts-pack-of-3-tt-3mm-1-100-13020-p.png?v=1771215147"},{"product_id":"lx077-120-laser-cut-old-wooden-fencing-for-tt120","title":"LX077-120 Laser Cut Old Wooden Fencing For TT:120","description":"\u003cp\u003eAdd detail and atmosphere to your TT:120 scale model railway layout with this old wooden fencing kit, cut from real wood based laserboard for a completely authentic finish! \u003c\/p\u003e\u003cp\u003eGreat for detailing a run-down \u0026amp; neglected area of a busy railway yard, back alley or scrap yard. Fence stands a scale 6ft tall approx (15mm) and the pack contains 5 x 91mm sections giving a total of 455mm of fencing plus posts \u0026amp; rails for rear fence detail.\u003c\/p\u003e\u003cp\u003eEach of the fencing sections is unique with broken panels \u0026amp; damage and can be easily painted \u0026amp; weathered using artists acrylic paints \u0026amp; weathering powders. Very easy to assemble; simply glue the post \u0026amp; rail sections into place on the rear of the fence, then drill a row of 1mm holes in your baseboard to accept the posts.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLaser cut parts for ease of assembly.\u003c\/li\u003e\n\u003cli\u003eVery quick to work with: each length of fencing consists of just two components.\u003c\/li\u003e\n\u003cli\u003eVery sturdy once assembled.\u003c\/li\u003e\n\u003cli\u003eCompatible with all brands of TT:120 scale model railway\u003c\/li\u003e\n\u003cli\u003eEasy to follow instructions included\u003c\/li\u003e\n\u003cli\u003eFence Dimensions: L: 455mm x H: 15mm (installed fence height) x D: 1mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53325965033736,"sku":"LX077-120","price":9.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx077-120-laser-cut-old-wooden-fencing-for-tt-120-13805-p.png?v=1771216996"},{"product_id":"cx007-ultra-fine-black-mesh-for-chain-link-fencing-fishing-nets-etc-05mm-for-oon-gauge","title":"CX007 Ultra Fine Black Mesh For Chain Link Fencing \/ Fishing Nets etc (0.5mm) For OO\/N Gauge","description":"\u003cp\u003eAn ultra fine black mesh which is perfect for modelling chain link fencing in OO\/1:76 scale and N gauge. This specially selected nylon diamond mesh has 0.5mm holes making it ideal for representing chain link mesh for fencing on OO scale and N gauge layouts. Or for simulating fishing nets in our \u003ca href=\"\/products\/lx214-oo-potato-fishing-net-crates-pack-of-4-oo4mm176\"\u003eLX214-OO Fishing Net Crates\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eSold in 500mm x 100mm sections.\u003c\/p\u003e\u003cp\u003eAlso suitable for other scales too.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eScale compatibility:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOO \/ 4mm \/ 1:76\u003c\/li\u003e\n\u003cli\u003eN \/ 2mm \/ 1:148\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.scalemodelscenery.co.uk\/oo-gauge-harbours-63-w.asp\/\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/the-harbour-collection_jpg.jpg\" style=\"width: 450px; height: 229px;\"\u003e\u003c\/a\u003e       \u003c\/p\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53325988561160,"sku":"CX007","price":2.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/cx007-ultra-fine-black-mesh-for-chain-link-fencing-fishing-nets-etc-0.5mm-for-oo-n-gauge-14401-p.jpg?v=1771217385"},{"product_id":"cx008-fine-grey-mesh-for-chain-link-fencing-2mm-for-o-gauge-larger","title":"CX008 Fine Grey Mesh For Chain Link Fencing (2mm) For O Gauge \u0026 Larger","description":"\u003cp\u003eAn fine grey mesh which is perfect for modelling chain link fencing on 1:32 scale slot car layouts and dioramas. This specially selected nylon diamond mesh has 2mm holes making it ideal for representing chain link mesh for fencing on O scale model railway layouts and larger scale dioramas up to 1:18 scale. \u003c\/p\u003e\u003cp\u003eSold in 500mm x 150mm sections.\u003c\/p\u003e\u003cp\u003eAlso suitable for other scales too.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eScale compatibility:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1:18\u003c\/li\u003e\n\u003cli\u003e1:24\u003c\/li\u003e\n\u003cli\u003e1:32\u003c\/li\u003e\n\u003cli\u003e1:35\u003c\/li\u003e\n\u003cli\u003e1:43\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53325989478664,"sku":"CX008","price":2.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/cx008-fine-grey-mesh-for-chain-link-fencing-2mm-for-o-gauge-larger-14424-1-p.jpg?v=1771217402"},{"product_id":"lx011-120-laser-cut-6ft-wrought-iron-railings-tt120254mm1120","title":"LX011-120 Laser Cut 6ft Wrought Iron Railings TT120\/2.54mm\/1:120","description":"A pack of laser-cut wrought iron railings (LX011-120). Cut from 0.5mm laserboard to produce a flexible yet very durable fencing kit. These railings have a wide range of uses on your TT:120 scale model railway layout or 1:120 diecast diorama. This fence stands a scale 6ft high in TT gauge (15mm) and is flexible enabling it to follow bends in roads \u0026amp; track, yet sturdy enough when assembled to stand the test of time on your layout. Supplied as a pack of 4 pre-cut giving a total of 43cm of fencing. Supplied unpainted.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eLaser Cut from 0.5mm brown laserboard (a very durable wood based board) - You only need a knife to gently release the parts from the sheet, all cutting is done for you!\u003c\/li\u003e\n\u003cli\u003eSimply mark \u0026amp; drill pilot holes in your baseboard, then glue the railings into place\u003c\/li\u003e\n\u003cli\u003eFlexible\u003c\/li\u003e\n\u003cli\u003eScale accuracy - We use a 0.1mm ceramic laser for very tight tolerances \u0026amp; accurate scaling from real life 1:1 prototypes.\u003c\/li\u003e\n\u003cli\u003ePerfect for any TT120 \/ 1:120 \/ 2.54mm model railway layout or diorama.\u003c\/li\u003e\n\u003cli\u003eCompatible with all makes of TT120 gauge model railway.\u003c\/li\u003e\n\u003cli\u003eCan be easily cut to length with scissors or a knife.\u003c\/li\u003e\n\u003cli\u003eFence Dimensions: L: 428mm x H: 15mm (installed fence height) x D: 0.5mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53326036631816,"sku":"LX011-120","price":11.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx011-120-laser-cut-6ft-wrought-iron-railings-tt120-2.54mm-1-120-15784-p.jpg?v=1771218053"},{"product_id":"lx161-n-castellated-i-beam-5mm-pack-of-6","title":"LX161-N Castellated I Beam 5mm (Pack of 6)","description":"A kit of laser-cut parts to build 6 Castellated I Beams, each 5mm in height and 133mm in length. Precision cut from 0.4mm laserboard and can be painted with acrylic paints etc. Ideal for realistic structural work on scratch-building projects, construction site detailing and for use as lorry and wagon loads in a wide range of scales. Can be easily cut to length prior to assembly.\u003cbr\u003e\u003cbr\u003eDimensions (Each assembled beam):\u003cul\u003e\u003cli\u003eL: 133mm x H: 5mm x D: 2mm\u003c\/li\u003e\u003c\/ul\u003eScale Compatibility:\u003cul\u003e\u003cli\u003eAll scales - But mostly suited to N gauge \u0026amp; OO gauge\u003cbr\u003ePlease check dimensions thoroughly to make sure these are suitable for your project before ordering.\u003c\/li\u003e\u003c\/ul\u003e","brand":"Scale Model Scenery","offers":[{"title":"Default Title","offer_id":53326333706504,"sku":"LX161-N","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1019\/8368\/2824\/files\/lx161-n-castellated-i-beam-5mm-pack-of-6-38929-p.jpg?v=1771227015"}],"url":"https:\/\/www.scalemodelscenery.co.uk\/collections\/laser-cut-kits-259.oembed","provider":"Scale Model Scenery","version":"1.0","type":"link"}