FREE UK DELIVERY when you spend over £50  -   UK MANUFACTURER  -   JOIN the FREE Railway Modellers Club -  01530 456 952 (Mon-Fri 9am - 5pm)

OO Scale

LX030-OO Laser Cut Platform Fencing OO/4mm/1:76

LX030-OO Laser Cut Platform Fencing OO/4mm/1:76

£8.24 £6.87 (ex. VAT)
Only 166 left in stock
You will earn 8 points with this purchase
A pack of laser cut card Picket style platform fencing as used by a number of railway companies over the years including LNER, GWR, LMS & SR, and can also be used in a number of other areas on your OO scale model railway layout. Available in two heights, 16mm and 20mm representing scale heights of 4ft & 5ft respectively.
The fence is easy to assemble, requiring just a craft knife and suitable glue with a fine tipped applicator, and is flexible enough to be used on curved platforms and is easily cut to length too. Supplied pre-cut with 8 strips of fencing, 4 ramp sections (2 left hand, 2 right hand) plus 2 single gates and one double gate. Can be painted using artists acrylics or left in its natural colour for a weathered appearance.

Key Features:
  • Laser Cut 0.7mm - You only need a knife to gently release the parts from the sheet, all cutting is done for you!
  • Very easy to assemble - just a few minutes per gate & length of fencing.
  • Can be glued directly to your platform (requires posts to be trimmed), mounted into holes or glued along the rear edge of the platform
  • Scale accuracy - We use a 0.1mm ceramic laser for very tight tolerances & accuracy.
  • Simple, sturdy, layered construction for a durable model once assembled.
  • Perfect for any OO / 1:76 / 4mm model railway layout or diorama
  • Compatible with all makes of OO gauge model railway
  • Supplied with easy to follow instructions, in a cellophane packet.
  • Dimensions: L: 120cm (excluding ramps & gates) x H: 16 or 20mm x D: 2mm
  • Brand:
    Scale Model Scenery
  • Product Code:
    LX030-OO-16mm
  • Weight:
    0.07kg
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
busmalc -

Perfectly cut fencing, easy to remove from sheet. All that is needed now is a platform kit to go with it. Keep up the good work.

Great idea! -

I wouldn't have thought about the need for sloped fencing if I hadn't come across it on this website. To make this yourself would be tedious and painstaking. The laser-cut fences are detailed and clean and I would definitely use them again.

G Purbrick -

Quality and looks are very good and the product arrived well packaged. Although the fitting information suggested a 1.5mm hole for the post I found that 2mm holes were necessary to enable fencing to locate without either damaging or forcing the fence post into their location holes.

Jim Kelly -

Great product. Looks lifelike and is easy to build.