LX007-18 Laser Cut Chain Link Security Fencing 1:18 Scale

Add detail & realism to your 1:18 sdale diecast dioramas with this Laser Cut LX007-18 Chain Link Security Fencing Kit for the 1:18 scale diorama builder. This kit comprises of enough pre-cut fence posts to build just over 1m of fencing including fine black/grey nylon mesh for the chain link mesh. Clever hinge design on the gates allows the gates to be moved.

Standing around 8ft tall in 1:18 scale (135mm) this is ideal for use as a perimeter fence around an industrial scene or garage etc. Also included is a small personnel gate and a pair of larger gates for vehicular access etc. Very realistic, with precision cutting for accuracy. Posts & gates laser-cut from MDF making it easy to work with and paint.. Supplied unpainted, but can be quickly painted using grey / beige artists acrylic paint or a can of spray from halfords etc. Predrilled holes in the top of each post allow you to thread a suitable twisted wire through them to represent barbed wire (shown in picrture as an example but barbed wire is not supplied with the kit).

Each post has a 4mm x 4mm tab on the bottom to allow it to be easily mounted into holes drilled in your diorama base.

Note: Modelling skills and a steady hand are necessary to build this kit, but the finished result is well worth it!

Kit Features:

• Laser Cut from 4mm MDF - You only need a knife to gently release the parts from the sheet... all cutting is done for you!
• Full instructions included
• Enough mesh included to build just over 1m of fencing. (1.5m including gates)
• Perfect for any 1:18 scale diecast diorama
• Compatible with all makes of 1:18 scale diecast vehicle
• Mesh can be easily cut to length with scissors or a knife.
• Fence Dimensions: L: 1000mm x H: 135mm (installed fence height) x D: 24mm

A detailed step by step build guide can be found in the free section of our model club here: 

LX007 Chain Link Security Fencing Kit Detailed Step By Step Build Guide