Deluxe Materials AD-87 Laser-Cut Kit Glue (25g)

Very little is needed, quick setting and good on windows

Excellent product fast delivery

This glue works really well. Easy to use with the pin applicator.

Does exactly what it says on the bottle

It's a versatile glue for laser cut wood and card kit that really holds

The products were as described , delivered in time. Would certainly use this supplier again

i like the way is designed with the nedle like applicator so it can get into all areas the only negative iseethe size it could b larger

Easy to use

easy to use .sets quickly

What I liked about this glue is its ease of use. Bottle comes with a fine metal tube that allows precise application of the glue. The glue allows you enough time to make adjustments but then gets tacky very quickly forming a reasonable bound in minutes allowing you to quickly construct your kit. Do not get it on the printed paper as it easily leaves a mark and trying to clean it off can damage the paper. I had a slightly damp paper towel just in case but quickly remove the glue if you get it where you don’t want it. Otherwise it’s the ideal glue for you laser cut kits highly recommend it.

Easy to use, keep clean between using.

Wonderfull kits need a great glue and thi does the trick.

This works with card and wood and for n gauge the very fine tip is great. The only problems are remembering to keep the end of the tip in a sponge when not using it and when the tip does eventually clog it needs an ultra fine wire to clear it, which I haven't found yet.

Very fast to dry. The wire that seals the disensor is very thin and difficult to see at times. Getting it to fit in the dispensor was tricky at first. V. good glue thugh.

Just the job, to be able to accurately put the glue where you want it

Like: ease of use, effective, no mess

This is an excellent adhesive for laser-cut parts so I’ve given it 5*. BUT, it’s such a good glue that it welds the cleaning pin to the needle applicator, even if you replace it immediately. If ordering I suggest you also purchase some spare needle applicators.

Excellent applicator allows small amounts of glue to be accurately placed but am having problems with the cap leaking, which I haven't got to the bottom of.

I cannot clean the add ons

Easy to apply as log as you keep the tip moistened

Works well for laser cut wood. The fine tip does give really good control for small surfaces. Mine came without a cap but seems ok with the stylus kept in the nozzle

This is an excellent adhesive and with the fine nozzles great to use with minimal mess and wastage.

Does as it says excellent product

Excellent product this is my 5th order

Great range of glues, easy to apply and sticks like .... it should!

Can set quickly

best too have everything ready to glue, as the nossil clogs up quickly

great glue but can clog up quickly

This is another excellent glue from DM, and I thought that the precision applicator would be excellent for building laser cut kits.... However.... It is very unforgiving if you do not follow the instructions precisely! The very thin nozzle blocks quickly and the small pin supplied is easy to get stuck in there when trying to clear it. I ended up using the glue with a pin to apply it to the kit I was building. In short, stick to the instructions rigidly and it is probably fine to use. Deviate from them and it will gum up fast.

The glue is great with the fine tip it's easy to apply

economical to use, good adhesion. Applicator needle not easy to keep unblocked

Bonds laser cut buildings together very well and not messy